DEVMO 2.2 Inch ILI9341 SPI TFT LCD Display 240x320 ILI9341 LCD Screen with SD Card Slot Compatible with Ar-duino Raspberry Pi 51/AVR/STM32/ARM/PIC

Industrial & Scientific › IndSpecifications: Resolution: 240x320 Driver IC: ILI9341 Input Voltage: 5V/3. 3V Size 2. 2 inch, It has PCB backplane with power IC, SD card socket LED Numbers 4 LEDs, Driver IC: ILI9341, Color Depth 262K/65K Module Size:67mm(length)*40mm(width)*4mm(thickness), Active Area: 47. 5mm(Length)x36. 5mm(Width) Package Included: 1*2. 2" 2. 2 inch 4-Wire SPI TFT LCD Display Module How to use it. 1. use 5v to led pin, 3. 3v to vcc and 1k / 1. 5k resistor voltage dividers to get it to work. 1k resistor in series from Ar-duino to tft logic pin, 1. 5k from tft pin to ground. 2.define TFT_DC 9define TFT_CS 10define TFT_MOSI 11define TFT_CLK 13define TFT_RST 12define TFT_MISO 8 3. // Use hardware SPI (on Uno,13,12,11) and the above for CS/DC //ILI9341 tft = ILI9341(TFT_CS, TFT_DC). 4. // If using the breakout, change pins as desired ILI9341 tft = ILI9341(TFT_CS, TFT_DC, TFT_MOSI, TFT_CLK, TFT_RST, TFT_MISO). Serial monitor output: 1-- ILI9341 Test. Display Power Mode: 0x94 MADCTL Mode: 0x48 Pixel Format:0x5 ImageFormat: 0x80 Self Diagnostic: 0xC0 Benchmark Time (microseconds) 2-- Screen fill 18159720 Text 921664 Lines 8537648 Horiz/Vert Lines 1485756 Rectangles (outline) 946520 Rectangles (filled) 37689232 Circles (filled) 5325780 Circles (outline) 3725412 Triangles (outline) 1944508 Triangles (filled) 12525852 Rounded rects (outline) 1782700 Rounded rects (filled) 40989648.