Dawn Railing 20 Pairs Invisible Cable Railing Hardware Kit for 1/8" Cable

1. Equipped with a CABLE STOPPER in each bag which can easily fix the wire rope during the tightening process and prevent the wire rope from rotating. 2. Can be used on all sorts of posts in wood or metal and applicable in both level and angled systems. Dawn Railing 33 Degree Angle Washer is recommended if you have a stair railing project. Install steps： Step1: Make the measurement of the cable, and please take note that there will be 1" range to tension this system. Step2: Make the hand swage job on the both flat head terminal and let the cable goes through the intermediate post (Make Sure the Post Holes diameter at least 10mm) Step3: Make the hand swage job on the threaded stud and make the connection with the invisible receiver (Make Sure the Post Holes diameter at least 10mm) Step4: Put the cable into the cable stopper and rotate the L shape bar to hold the cable tightly. This stopper will help you to keep the system not rotating during the tension job Step5: Hold the stopper and rotate the L shape wrench to tension the system.