Readytosky Pixhawk PX4 Flight Controller Autopilot PIX 2.4.8 32 Bit Flight Control Board+Safety Switch+Buzzer+I2C Splitter Expand Module+16GB SD Card

Pixhawk PX4 Autopilot PIX 2. 4. 8 32 Bit Flight Controller Features: 1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system. 2. 14 PWM / servo output. 3. Bus interface (UART, I2C, SPI, CAN). 4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe. 5. Provide automatic and manual modes. 6. Provide redundant power input and failover. 7. Multicolor LED lights. 8. Provide multi-tone buzzer Interface 9. Micro SD recording flight data. Specifications: Microprocessor 1. 32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit 2. frequency: 168MHZ, 256K RAM 3. 32 STM32F103 backup coprocessor Sensor 1. L3GD20 3-axis digital gyroscope 16 2. LSM303D 3-axis accelerometer 14 / Magnetometer 3. MPU6000 6-axis accelerometer / magnetometer 4. MS5607 precision barometer Interface 1. 5 high voltage compatible UART 1, 2 with hardware flow control 2. 2 CAN 3. Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input 4. Futaba SBUS compatible inputs and outputs 5. PPM Signal Input 6. RSSI (PWM or voltage) Input 7. I2C 8. SPI 9. 3. 3 and 6. 6VADC input 10. External MICRO USB Interface Packing list: 1 x Pixhawk 2. 4. 8 32bit ARM Flight Controller 1 x Original shell 1 x Pixhawk Safety Switch 1 x Pixhawk Buzzer 1 x 4G TF card(IO firmware has written) 1 x Servo cable 1 x 4pin turn 4pin cable 1 x 3pin DuPont line 1 x Pixhawk I2C Splitter Expand Module.