Mactoom 12mm x 1.5 HSS Metric Tap and Die Set Right Hand Thread,Tapping DIY Tool 3pcs (M12 x 1.5mm)
غير متوفر
الوصف
Tips: 1. Appropriate addition of coolant (e. g. , water) can extend the service life when tapping. 2. Please control speed according to material hardness. The higher the hardness, the slower the speed. Fast speed with small torque. slow speed with high torque. The force must be uniform in tapping operations. 3. First drill the hole with twist drill, and then use the taps tapping. Tapping angle should be vertical 90 degree and keep stable. 4. Tapping depth should not exceed 1. 5 times the diameter of the tap: For example: diameter of M6x1 about 6mm, the depth should not exceed 9mm.