Singer Sewing Machine Stitch Gauge & Guide

The Singer Stitch Gauge and Guide easily creates precise seams and hems for machine sewing. Simply position the seam gauge under the presser foot, lower the needle into the selected hole, and secure the presser foot over the gauge. Remove the seam guide’s protective adhesive backing and set aside for later use, then align the guide against the edge of the gauge and press into place. Raise the presser foot and needle to remove the gauge, leaving the guide in place to direct the fabric edge for a consistent and precise seam. Replace adhesive backing after each use. To remove lint build up on the adhesive tack strip, spray with a little glass cleaner and gently rub linty area with thumb or finger. The lint will begin to float to surface as you rub it. Rinse debris away with warm water and let air dry. Guide will be ready to use again in a few minutes.