Luminor RL-999 Replacement Lamp for UV BLACKCOMB

GENUINE LUMINOR RL-999 REPLACEMENT LAMP: This is the factory lamp built by Luminor for BLACKCOMB 4. 1, 5. 1, and 6. 1 systems, not an aftermarket equivalent. Luminor tests and certifies its systems and lamps as a complete unit, so the output rating on your system applies only when a genuine RL-999 Luminor lamp is installed, RESET KEY INCLUDED IN EVERY BOX: Each RL-999 ships with the Luminor lamp key, the part that lets the controller clear its hour counter once the new lamp is seated. Without the key, the system keeps counting against the old lamp, so having it in the box means no second order and no delay between opening the package and finishing the job, FITS LB4-151, LB5-151, and LB6-151: One lamp covers all three 15 GPM BLACKCOMB models, whether you have the basic 4. 1 controller, the 5. 1 with its display, or the 6. 1 with the UV sensor. The model number is printed on the chamber label. Note that the higher-flow LBH series is a different reactor family and does not take this lamp, PLAN ON ONE LAMP PER YEAR: Luminor rates the RL-999 for 9,000 hours, roughly twelve months of continuous operation. UV-C output from a low-pressure lamp weakens gradually long before the lamp stops lighting, so a lamp that still glows is not necessarily still performing. Replacing on the annual schedule keeps the system running at the level it was rated for, 50 WATTS, 39. 3 INCHES, TOOL-FREE CHANGEOUT: A low-pressure coated lamp measuring 999 mm end to end, with a bayonet-style connector that twists into place by hand. No tools, no wiring, and no guesswork on orientation. Most homeowners complete the swap in a few minutes after shutting off the inlet and unplugging the controller, PAIR IT WITH THE QUARTZ SLEEVE: The RQ-999 sleeve sits between the lamp and the water and should be replaced every 24 months, since scale and film on the sleeve reduce output the same way an aged lamp does. Doing both at once is why many owners order the RLQ-999 lamp and sleeve kit on alternating years inste