FFtopu Compatible with iPhone 8 Plus Screen Replacement Black LCD Display & Touch Screen Digitizer Frame Assembly Set with 3D Touch Free Repair Tool（5.5''

br> Product description: This kit is only compatible for iPhone 8 plus Screen Replacement Black(5. 5'') model A1897/A1898/A1864 Please make sure you identify your Phone correctly before purchase. Wrong model may damage your Phone. Tips before install: 1. please check carefull if the Flex cable are all in good condition 2. Please connect the flex cable to test the new display before installation Power on the iphone,then press one of APPs and move around the display. Precaution: 1. Make sure your phone is powered off first before installation. 2. Because of the screws have long or short ,so please be carefully do not put the screw in the wrong place or it will damage the screen. 3. please transfer the home bottom from your original screen ,because only the orginal home bottom can make your touch ID work. 4. Make sure for iPhone IOS is upgraded to the lastest version. 5. Please check carefully if the screen have crack, scratches or something omission when sign for the parcel. FAQ: 1. After install ,the screen came out black or unresponsive,what should I do. Could you please check and do it as below. a. Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connector. b. Disconnect and reconnect the flex cables from the motherboard side. c. Then Reboot: Hold buttons (Home, Up volume, and Power button) until the phone switch down and then switch up again. d. Make sure IOS has been upgraded to the latest version. please transfer the home bottom from your orginal screen,Because only the orginal screen can make your touch ID work. and our screen is not include home bottom.