ElecGear TMR Joystick Replacement for Steam Deck LCD Electromagnetic Hall Sensor Left and Right Thumbstick Module PCBA for MEDA and MHDA Repair Tool Kit Included

TMR Joystick for Steam Deck LCD Previous L3R3 clicking range changing issue was resolved in this new version It was updated from Hall to new TMR joystick Its a direct replacement for Steam Deck LCD Works with both MEDA and MHDA controller ID The module can be calibrated with command ThumbstickCal in Konsole A Better Stick for SD 1 Newest TMR inside 2 Works with both MEDA and MHDA controllers 3 Hall sensor to eliminate the possible drifting in hardware level 4 Pure analogical trim circuit with no latency 5 ESD diode added to protect the unit from static electricity Reminder of DIY 1 Safely power off your console 2 Teardown your Steam Deck and take out the problem LR units 3 Desolder the wire of sensitive cap off the PCB 4 Solder the caps wire 5 Install the new stick and connect the flex cable 6 Calibrate the new module in desktop mode by command ThumbstickCal in Konsole Moderate soldering tools and skill needed for the replacing operation Whats in Box 1 Replacement Joystick Modules 2 PH0 Screwdriver 3 Tweezers 4 Plastic Opening Tools Soldering tools and materials are NOT included.