UHPPOTE 1 Port 10/100M PoE Extender IEEE802.3af For Ethernet Security Systems IP Camera

Features: Comply with IEEE 802. af Power over Ethernet 10/100M Supported Extender the range of PoE an additional 120 meters Automatically detects and protects PoE equipments from being damaged by incorrect installation Plug-and Play, no configuration required 1 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 UTP cable The green light is normally on, the yellow light flashes when data is transmitted Other Specification: PoE input: 1 RJ45 port PoE output: 1 RJ45 port Network Medium: Cat5 or better UTP cables (less than 120m) Repeater Mode: Store and forward MAC Address Table: 2K Packet Buffer Memory: 48 Byte Switching Capacity: 400Mbps PoE Standard: IEEE 802. 3af Input power: 13 Watts Output power: 12. 2 Watts Power Supply Type: 1/2,3/6-,Mode A,End-Span Network Protocol: IEEE 802. 3i-10BASE-T, IEEE 802. 3u: 100BASE-TX, IEEE 802. 3x-Flow Control, IEEE 802. 3af-Power over Ethernet. Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU,Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC. Working Temperature: 0°C40°C Working Humidity: 10%90%,No Condensation Storage Temperature: -30°C70°C Storage Humidity: 5%90%, No Condensation. Dimension: 75x37x26. 5mm / 2. 95'' x 1. 46'' x 1. 04'' Weight: 60g Note: Please don't place any heavy thing on the PoE extender. To prevent the water seeping into the extender,please keep PoE extender away wet environment. Suggest to use PoE extender indoors. When installing the extender in outdoor,please install it in a waterproof place. Package Include: 1 x 1-Port PoE Extender.