Fused Materials PVA 3D Printer Filament, 1.75mm, 0.5kg roll

Easily Remove Support Structures. Our latest advancement in 3D printing material technology is a water-soluble filament designed to enable an easy removal of the support structures from any print. PVA filament is designed to be used with dual-extruder 3D printers and is solely used to print the support structures for your 3D print. A Truly Innovative Material PVA filament is a unique 3D printing material that will dissolve in water thus eliminating the risk of imperfections caused from removing support structures from 3D prints. Safe & Easy to Use. Once your print is complete, simply place it in water at room-temperature and the PVA support structures will begin to dissolve. Soon after you'll be ready to easily peel off the support structures from your print avoiding the risk of imperfections from chipped off support structures. Don't let PVA sit in your extruder. PVA can jam your printer if you let it sit for an extended period of time. Nozzle Temp: 190 – 220 -Bed Temp: 60 C (recommended but not required) - Slow print speed 30mm/sec) -110% flow rate -Fan Settings: Use what works for you when printing with PLA -Zero Z-gap required. Note that some systems use a default Z-Gap such as Cura - PVA must be kept dry. Do not store this material in a humid environment.