ThePoEstore PoE Injector Adapter, PoEInjector 30W 10/100/1000Mbps IEEE 802.3af Compliant, Up to 100 Meters (325 Feet

Please refer to the seller ThePoEstore. Otherwise you may buy inferior products Use PoE injector with PD to expand your network to where there are no power lines or outlets,where you wish to fix devices such as APs,IP camera or IP Phone,etc. The PoE injector is a single port poe injector offer a compact and cost effective,it can convert standard 100 240V ac power into low voltage. DC that runs over existing LAN cable to power up IEEE 802. 3af/at compliant network accessories. Remote powering of wireless LAN(WANaccess points,IP security cameras,VoIP telephone and other low port density installations. Features: Up to 15. 4W/30W of Power on 2 pairs Supports 10/100/1000 Base T applications Led indicators power input and poe output Internal ac/dc converter no need for external power brick easy plug and play installation Muti protection Specification: Pass Through Data Rates: 10/100/1000Mbps Out Power Voltage: 54VDC User Port Power: 30W max AC Input Voltage: 100 240VAC Ac Input Current: 0. 5A 100 240VAC AC Frequency: 50 to 60 HZ Dimensions: 121x50x36 mm/4. 76x1. 97x1. 42 in System Indicator: AC power Connectors: shielded RJ 45,EIA 568A and 568B Operating Ambient Temperature: 0 to 40 ℃ Storage Temperature: 40 to 60 ℃ Installation Steps 1. Use a CAT5 UTP cable to connect port of Ethernet devices to the DATA IN port 2. Connect AC cable with Injector and Socket 3. Connect the PoE OUT port to a PD with CAT5 UTP cable.