VXSCAN El50448 Auto Tire Pressure Monitor Sensor Relearn TPMS Reset Tool OEC-T5 for GM Series Vehicle 2010-2018

Before tire pressure monitoring system works normally properly, the body control module will record ID information of each position in the tire pressure sensor, and use the following methods to read the tire pressure sensor after replacing a tire or wheel speed sensor.Please refer to the specific methods as follows: Step 1 - Enter leaning mode Set the gearshift lever to P Put the ignition switch to “ON” Enter the interface of tire pressure display by DIC DIC shows Press Set / Ctrl to re-learn Press “Set / Ctrl” The turn signal is lighted for 3 seconds and the horn beep sound twice to enter the learning mode Step 2 - Read tire pressure sensor information Start from the front-left wheel, Make the J-46079 or VXSCAN Auto Tire Pressure Monitor Sensor TPMS Reset Tool antenna up against the valve core position & close to the rim of the tire sidewall VXSCAN Auto Tire Pressure Monitor Sensor TPMS reset tool starts by the start switch Successful to read the tire pressure sensor information when the horn bleeps once Step 3 - Same method to read other tire pressure information Follow the instuction above to read tire pussure of the front-right, rear-right, rear-left wheels.Turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete.'