SUNLU Dryer Box of 3D Printer Filament.

SUNLU FilaDryer S1 is a dry storage box designed to provide the optimum environment for 3D printing filaments. 3D PRINTINGMATE Drying while printing to improve your 3D model Personality settings: 1. Add and subtract temperature: Users can adjust the temperature of the drying oven according to factors such as the material of the consumables, the ambient temperature, and the humidity. It is recommended to bake for more than 3 hours before printing for better results. When the drying oven is in the dry state, press the left button to decrease the temperature, and press the right button to increase the temperature. When the setting is completed, stop for about 3 seconds, the drying oven will automatically save and switch to the actual temperature interface. Temperature adjustment range: 35 „ƒ~55 „ƒ. The measured temperature is displayed as PV, and the set temperature is displayed as SV. NOTE: 1: Before printing, it is recommended to bake it for 3 hours, and then print, the effect will be better. 2: When the ambient temperature is low and the drying oven does not heat up to the set value, it is necessary to extend the baking time1 hour. 3: It will have better printing effect when used with printer. MAXIMUM CAPACITY: Filament Diameter: 1. 75mm/2. 85mm/3mm Max Capacity: 21085(Hmm Packing List 1 Filament Dryer 1 Adaptor 1 Instruction 2 Rollers.