OVERTURE PLA Matte Filament 1. 75mm with 3D Printer Build Surface 200mm. 200mm, Maple Wood PLA Roll 1kg Spool (2. 2lbs, Dimensional Accuracy/- 0. 05 mm, Fit Most FDM Printer (Light Brown.

Description: Express your creation with OVERTURE Matte PLA series. These Matte PLA filaments are developed based on natural PLA material (Polylactic Acid, which boasts complete biodegradation and lower melting temperature, ecofriendly and safe, with no odor during the printing. Moreover, this Matte PLA filaments is perfect for outputting quality prints with shinefree colour and frosted texture. FAQs: Why cant the filaments stick to the build bed. , 1. Check the temperature setting before printing, PLA filaments have lower extrusion temperature; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure an strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to relevel the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing. Specification: Recommended Extrusion/Nozzle Temp: 190C 220C (374 F~ 428 FHeated Bed Temp: 50C 70C (122F ~ 158FFilaments Diameter and Accuracy: 1. 75 mm/0. 05 Printing Speed: 30~70 mm/s (1800mm~4200 mm/minFilaments Net Weight: 1 kg (2. 2 lbsPackaging Included: 1 ¡Á spool of Matte PLA filaments 1 ¡Á build surface.