Sewell Direct SW-29310 Sewell BlastIR Emitter and Receiver Wall Plate Kit

If you want to clean up your home theater setup by putting all the devices in a closet, your remote control wonâx80x99t work anymore. Thatâx80x99s because remote controls work by using Infrared (IRsignals, which can only work through line of sight. Thatâx80x99s why you need an IR extender. This kit will provide all the parts you need to extend your IR signal to wherever you are hiding all of your equipment. That way you get the clean, professional look you want, but you are still able to use all of your remotes to control your home theater equipment. How it Works The two wall plates connect to each other via any 4 conductors such as 4 wires from a networking cable. It can control up to 4 different devices and after installation all that you can see is a small wall plate. Specifications Please Note This product is NOT compatible with the following models of the ATT U verse cable box: Cisco Explorer 4642HDC, IPN 4320, IPN 330HD and the Motorola VIP series. There are other models of the U verse that are also likely incompatible with the BlastIR. IR Connecting Block Wall Plate Provides one IR receiver input and three IR emitter outputs Works with practically all brands of Audio/Video IR remote controls 12VDC status input jack and LED indicator Interface: 3. 5mm mini plug (for receiver and emittersTerminal block (for CAT5Dimension: 114mm x 70mm x 37mm (including blank wall platePower supply: 12VDC, 200mA In Wall IR Receiver Wall Plate Designed to be surface mounted for multiple applications Works with practically all brands of Audio/Video IR remote controls IR receiving: 18' 30' (remote control dependentFrequency range: 34 60 kHz Dimension: 114mm x 70mm x 18mm Power supply: 12VDC, 200mA Single IR Emitter Designed to be surface mounted for multiple applications Works with practically all brands of Audio/Video IR remote controls Operation Frequency: 38 56KHz Interface: 3. 5mm mini plug Cable length: 9 feet Includes adhesive tape for IR mounting. Dual IR Emitter Designed to