ATOKIT Night Vision License Plate Frame Car Rearview Camera 8 Infrared LEDs Wide Viewing Angle Waterproof Sturdy Sleek Backup Camera High Sensitive Vehicle Universal Reversing Assist Security (Black)

Specifications- Sensing area: NTSC 4.08 x 3.10mm- Effective Pixels: NTSC 795*596 pixels- Horizontal Resolutions: 480 TV lines- Minimum Illumination: 0lux with IR on- Video output: RCA connector, 1.0V p-p, 75ohm- Power Consumption: 60mA- 𝐏𝐨𝐰𝐞𝐫 𝐒𝐮𝐩𝐩𝐥𝐲: 𝐃𝐂𝟏𝟐𝐕 Purchase Notes:1.Our Atokit license plate frame backup camera is perfect for rear view.The Monitor/LCD/Screen/Display/Radio is NOT included.2.Easy to intall by reading the user manual, and this is a wireing car backup camera instead of the wireless.3.This camera only supports NTSC video system, so please make sure your monitor supports NTSC video system before you buy it.Package Contain:1 X License Plate Frame Mount Rear View Camera1 X 3.5ft Power Cable1 X 20ft RCA Video Cable1 X User Manual Installation Notes:*During installation, please connect the power cable of the backup camera to the harness wires that connect to the backup light on the tail light assembly.*The RED wire end is positive, while the BLACK one is negative.And connect the RCA output end to the car monitor.*The camera switch is controlled by the reverse gear shift.*Please take care of the sealing to prevent water leakage when installation.*ONLY the generic suitable tool can be helpful for you to release the set screw on the camera and adjust the camera up and down for desired view angle.*When connecting this car backup camera to a FACTORY RADIO, a suited Harness & Programmer（not included because different RADIO need a different Harness & Programmer) will help you complete installation more efficiently.*You can apply electrical tape for the joint of the red power wires and RCA wires, and use zip ties to fasten the wire on your vehicle.'