Epindon TMR Electromagnetic Replacement Stick Module Compatible with Victrix Pro BFG Wireless Controllers Tactile Switch Conductive Rubber is NOT Required Both PS5 Xbox Version 2PACK 80G

Fix Stick Drift Conductive Rubber issues The left or right stick modules of the Victrix Pro BFG controllers can be replaced if drift or conductive rubber failure occursNo conductive rubber is required eliminates wearrelated issues permanently NextGen TMR Electromagnetic Module the TMR stick module for increased durability In addition the tactile switch is easy to press and feels good to press In particular it has a shorter response time which is an essential feature for FPS professional gamers Easily installation Unscrew the screws of faceplate and stick module PCB board with attached T20 driver Replace the stock module with Epindon TMR hall effect electromagnetic modulesAttention please insert and remove connector pins of left stick module slowly Calibration is required after installation Calibration method Press the L R stick and function button at the same time the function button LED will flash At that time turn the L R stick left counterclockwise and right clockwise 3 times each Then press the function button again the white LED will turns off to complete the module Calibration TIPS Always place the VICTRIX PRO BFG controller on a flat level surface when performing resetcalibration Multiple reset attempts may be required.