Nitze 4.5" Camera Suction Cup Mount - N48-A45

High Load CapacityNitze N48-A45 4. 5" camera suction mount supports 60 kg/ 132 lb of vertical suction and 40 KG/ 88lb of horizontal suction for still shooting. When the dynamic speed is up to 80 km/h, the load capacity is 3 kg/ 6. 6 lb. , 3 Steps Installation1. Removing the dust-proof cover and clean the surface. 2. Placing it to a clean, dry, flat, smooth, nonporous, and non-fragile surface. 3. Pressing the suction cup firmly and pumping the suction valve button until the white safety line is completely invisible. , Multiple Mounting PointsThe suction cup mount features a built-in NATO rail and multiple 1/4"-20 locating holes and 3/8"-16 ARRI locating holes for accessories extending. A safety pin at the end of the NATO rail prevents accidental falls. , Wide ApplicationThe suction cup camera mount can be attached to any clean, dry and smooth surfaces like metal/ceramic surfaces, car windscreen/windshield, flat glass door, car door, car hood, car window, etc. The suitable operating temperature range is -20C (60Fto -60C (140F. , NoteDoing the adsorption test without load at first. If the test fails, please contact. Mounting it onto recommended surfaces and check it at least every 4 hours. Keeping the suction cup chassis and filter cotton intact and clean. If broken or dirty, stop using it immediately. If the white safety line of the suction valve is exposed during use, it is necessary to pump immediately until the white line is invisible.