Gnimauhz Kitchen 59Inch or 150CM Pull Down Sink Faucet Replacement Pull Out Spray Head Hose Stainless Steel Electroplating 15 meters

Hose replacement designed for pulldown faucet parts The one end of the kitchen replacement hose with the sprayer G12 Female Thread about 34 19mm Connects to Sprayer fits most spray heads which have G12 straight male thread thread size about 2 cm or 08 inch not NPT not universal not applicable Spray at 12 Not a universal shower head connector The other end of the pull out hose Link to the faucet It does not come with quick link connectors not suitable for quickconnect faucets Below thread distance are both 1475mmbut their thread distance are different our replacement hose is male 15 with small gap thread which is 1mm another male 15 with large gap thread which is 15mmbut not our hose dimension before buying please check the size of the connector again Not universal Warm reminder the buyer commented that the replacement tube is suitable for some brands of faucets but this does not mean that it is suitable for all models of the brands faucets Please check the size carefully according to the instructions and replace the two ends of the tube with the same size to fit If you need help please contact our professional team we will definitely give you a satisfactory answer The length depends on personal preference there will be errors in different batches The material of the G12 is copper the outside of the hose is stainless steel and the inside is rubber Because the outer diameter of stainless steel is larger than nylon and the pullout hose needs to pass through the small hole in the faucet if your original pipe is nylon you cannot use this stainless steel.