InstallerCCTV Video Quad Color 4CH Multiplexer 2 BNC Output with Remote Control and FREE 1Amp power adapter

Video Standard: PAL: 50 fields/sec; NTSC: 60fields/sec Definition: NTSC: 720 x 480; PAL: 720 x 576 Video Input: 1. 0Vp p75 ohm Tape Input/Output : 1. 0Vp p75 ohm Border Color: Black, Gray, White, Off Selection Video Input Mode: Full Screen, electronic amplifying, Quad, PIP and Auto Sequence Working Voltage: DC12V/1A Camera Set Up Brightness Contrast Struration Hue Sharpness is adjustable brightness, contrast, hue and sharpness. Mirroring is the photo setting mode. When the setting is selected to be ON, the inputsignal will be displayed in with contrast direction. The default setting is OFF. Motion Setup: DETECTION TIME is the switch setting of the detecting time and it is available when the setting in the state of “ALWAYS ON” SENSITIVITY means the sensitivity detection. MASKING AREA means the area coordinate of detecting time. Event Set Up ALARM, LOSS, MOTION extended warning, video loss and moving detection open/close setting. BUZZER HOLD TIME means the extended time of the recorded events. REPORT HOLD TIME means the extended time of the events. ALARM POLARITY is the high and low voltage setting of the buzzer. Package includes: Remote Control Included Power Consumption DC12V / 1A.