BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

100% Brand New.Color: GoldMaterial: Copper Size: 12cm(L)*7.5cm(W)*16CM(H) Compare the detail sizes with yours, please allow 1-2MM differs due to manual measurementFlow Meters are more accurate than the flow gauge regulators.The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi.The output flow is adjustable from 0- to 25 lpm, and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum.The fitting is a CGA-580 fitting, so it fits all argon, nitrogen, and argon/CO2 mixed gas tanks.This does not fit CO2 cylinders.If you want a CO2 Flowmeter see our auction for those.A very nice thing about this Flow meter is the outlet will fit both the female 9/16 x 18 nut or the male 5/8 x 18 fitting.You can see the adapter in the picture.It comes with a standard 1/4 barbed fitting.If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8 x 18 male nut.Package Content: 1 x Argon CO2 Flow meter'