3mirrors Aluminum Tungsten Electrode Sharpener Grinder Head TIG Welding Tool 24 Guides, 24 Multi-AngleOffsets, Full-Featured Tool w/Dust Housing, Healthy Version.

3mirrors Tungsten Electrode Sharpener Grinder Angle Controller TIG WIG Welding Tool Grinding for 040 1/16 5/64 3/32 1/8 5/32 each 4 tips 30 36 45 60 (The problem of the 2 sets of hole direction and hole spacing has been improvedINSTALLATION STEPS : 1: Put on the 2 Orings to the aluminum main body to ensure the Dust cover can be fixed and prevent dust leakage; 2. Install the mandrel to a Diamond wheel; 3. Screw the aluminum main body on Rotary Tool , You can choose Dremel; 4. Set the grinding wheel and mandrel in the collet of your rotary tool; 5. Adjust the height of the Diamond wheel, Make sure the grinding wheel is parallel to the edge of the control head; 6. Push the transparent Dust cover on the control head; 7. If the dust cover is too tight to push, You could apply some oil (Whatever Engine oil, grease or Dishwashing liquidon the Oring so the cover will be easy to install; 8. Start grinding different angles tungsten needle, according to your needs; 9. After grinding, Centralized processing the tungsten power, avoid trouble, convenient and healthy.