TamperSTOP Tamper Seals Set - 50 Pieces of Stickers/Labels/Stickers/Stickers for Expensive Surfaces or Reusable Pack (Blue, L 35 x 120 mm, Triple Serial Numbers).

These nontransfer security void stickers provide both security and the added convenience to avoid leaving (or cleaning upa sticky adhesive residue. Applications: include automobile doors, appliance, electronic devices, voting machines, hard drives, pharmaceutical packaging, aircraft seals, gift certificates, PDA , safes, phone seals, cabinets, exhibitions, envelopes, documents, etc. and any application where residue is an issue. Before applying the stickers it is necessary: Shipping: Labels must not be exposed to temperatures over 100F (37Сduring shipment or storage. Temperatures over 100F can damage the labels and shorten the shelf life. Recommended Application: 1. If needed, clean the application surface with 90% Isopropyl Alcohol prior to affixing the label. 2. Apply security label to the cleandry surface at or above the recommended application temperature. Notes: On the recommended surfaces at 70F, the tamper evident feature should be functional within 1 minute of application. Other surfaces or lower temperatures may require more curing time. If the tamper evident feature does not perform immediately, more curing time usually improves the performance of the tamper evident feature. For best results, allow 1 hour curing time after application. General Minimum Application Temperature: 40F. General Service Temperature Range: 40F to160F. Storage: 1. Storage Temperature: 40F to 100F. 2. Storage Humidity: 20% to 60%. 3. Minimum Shelf Life: 2 Years. If relevant to record the number of the sealing label and its color.