Minwax Water Based Oil-Modified Polyurethane, Warm Gloss, Clear, 1 Quart

Keep interior wood projects looking beautiful with Minwax Oil-Modified Polyurethane Wood Finish.The water-based clear top coat combines superior durability with the beauty of traditional polyurethane.It adds long-lasting beauty and protection to interior wood surfaces including woodwork, furniture, doors, cabinets and floors.Plus, you can get more done with this protective poly coating.It’s an ultra fast-drying clear coat that allows for quick recoats in 2 hours, and because it’s water-based, it has a low odor and easy cleanup with warm water.It can be used on both finished and unfinished wood projects, and is available in a variety of sheens.Application Directions: 1.Surface must be dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt or other foreign matter.2.Sand to obtain a smooth, uniform surface.Do not use steel wool.Remove all sanding dust.Thoroughly wipe clean with a damp cloth.Allow to dry completely.3.If desired, apply Minwax stain to unfinished wood surfaces.Follow directions for application and dry times.Wait 8 hours after staining, before applying Oil-Modified Polyurethane.4.Stir Oil-Modified Polyurethane before and during use to eliminate settling on the bottom of the can.Stir to rotate the product from the bottom to the top of the can.NEVER SHAKE.5.Apply a THIN coat of Oil-Modified Polyurethane using a high quality synthetic bristle or foam brush.6.Let dry 2 hours.Then lightly sand entire surface with fine sandpaper (220 grit) to ensure an even finish and proper adhesion.Remove all dust.7.Apply a second coat.Oil-Modified Polyurethane requires a third coat, repeat step 6 before application.8.After final coat, allow 24 hours before light use.'