Minwax Fast-Drying Polyurethane Protective Wood Finish, 350 VOC, Warm Semi-Gloss, 1 Gallon

Keep your wood projects protected and looking beautiful with Minwax Fast-Drying Polyurethane.The oil-based clear top coat offers superior durability and long-lasting protection, while adding an even, crystal clear sheen.This clear coat is ideal for woodwork, furniture, doors, cabinets and floors.Directions: ', STEP 1: SAND THE FLOOR.Sand the floor to prepare it for finishing.Follow the floor sander manufacturer's directions., 'STEP 2: APPLY MINWAX WOOD FINISH STAIN (OPTIONAL).If you have sanded the floor down to bare wood, or you have a new, unfinished wood floor, you can stain the floor.Sand and prepare the floor according to the sander manufacturer’s directions, ending with 100 grit sandpaper.Remove all dust.STEP 3: Stir Polyurethane before and during use to eliminate settling on the bottom of the can.Stir to rotate the product from the bottom to the top of the can.NEVER SHAKE.STEP 4: Apply a THIN coat of Minwax Fast-Drying Polyurethane using a high-quality natural or foam brush.For floor projects, use a square buff orbital or disk-type sander with 220 grit sandpaper or the equivalent grit pad or screen (specifically designed for sanding between coats).Do not use a belt or drum-type sander for sanding between coats.Follow the sander manufacturer’s directions for your type of project.STEP 5: Apply second coat.If third coat is desired, repeating sanding.After final coat, allow 24 hours before light use.'