KOLSOL Network Cable Tester, Poe Cable r for CAT5e/CAT6/CAT6a, Ethernet Network r with NCV, NF-8209 Network Cable Tracker, Test Fault Distance Location and Length Measurement by TDR.

NF8209 POE Network Cable r features: 1. NF8209 Wire Checker can do continuity testing, length measurement, cable scan, PoE testing, port flash. 2. Digital cable scanningThree scan modes selectable: Digital mode/ Analog mode/ PoE mode 3. Scan Cable Wiremap r has lighting function, it can solve the trouble of dark work, very convenient. 4. Cable length testing accuracy can be up to 98% and 200 m. 5. Fault distance locationCable continuity testing Measure cable length and locate fault distance accurately for lan cable. the range is 200m. Test physical status for STP, UTP lan cable. 6. Hub blink Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M Hub/ switch. 7. PoE information testingNCV identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard5. Cable continuity testing Test physical status for STP, UTP lan cable. Detect AC voltage presence (50V1000V. NVC induction pen design, accurate electricity measurement, safter to use. 8. Test Type: CAT5e, CAT6, CAT6a (STPUTP Specification: Cable type: CAT5e,CAT6,CAT6a(STPUTPMax. Signal Voltage: 8Vpp Frequency:130KHz AC Filte: Yes Scan Max Range: 600m Length Test Range: 2200m POE Test Range: DC 560V standard/nonstandard PoE switch How to use the functions: 1. Cable scan: Connect the cable to be d to SCAN port of tranmistter on the left side, enter SCAN on the main menu, press ok to choose scan mode you prefer. 2. Continuity testing: Connect one end of cable to CONT port of tranmistter on the left side, the other end to the RJ45 port of remote, Press OK to start testing. 3. PoE testing: It can test the information of standard PoE device, such as POE voltage, power supply polarity, power supply mode and also the type of PSE(af or at standard.