DieseRC Safe Remote Control Switch DC 12V 24V 30V Wireless 433Mhz RF 10A Relay Receiver with 2 Transmitters for Motor Light Gate Door DIY Controller.

Package includes: 1 x relay receiver card (with case. 2x transmitters (contains one battery1 x product manual. Parameter: Receiver operating voltage: DC 6V~30V Input/Output Vloting: 1~250V Rest current:5MA Max Current: 10A RF Frequency: 433MHz Operating temperature: 30~80 Receiving sensitivity:97dbm Number of remote controls: 20 pieces Support encoding: 1527 Learning code RF Operation Mode: Superheterodyne ASK Wireless Reception Reception range: The open space is more than 50m Pin: COM,NO,NC Operation Mode: Momentary/Toggle/Locked Mode Battery: 2 x CR2016 (included. Use (Operating Mode: Momentary mode: 1. Press and hold a button, the relay turn on; 2. Release the button, this relay will turn off. Toggle mode: 1. Press the A button, the relay 1 will light up; 2. Press the A button again, this relay 1 will turn off f. LOCKED MODE: 1. Press the A button, the relay 1 will light up; 2. Press the B button, the relay 2 turns on, at the same time the relay 1 turns off. Reset: Press the learning button (on the receiver8 times. succeed. Note: After resetting, all remote controls can no longer work. Setup 1. Press the learning button (1 time for momentary mode, 2 times for toggle mode, 3 times for locked mode. Wait 3 seconds; 2. Press the A button. Wait 3 seconds. 3. Press the B button. Success. Note: All products are configured in toggle mode before shipping. If you want to change the operating mode.