H!Fiber.com 10Gb Ethernet Network Adapter Card- for Broadcom BCM57810S Controller Network Interface Card (NIC) PCI Express X8, Dual SFP+ Port Fiber Server Adapter

BCM-57810-2S based on Broadcom BCM57810S, is the solution of choice for workload intensive computing environments, providing a reliable, high-performance 10GbE connectivity solution.Features: Dual-port 10GbE connectivity for rack and tower servers x8 PCI Express, (PCIe,) V2.0 (5 GT/s) support Full line-rate performance across all ports Broad OS and hypervisor support Full iSCSI and FCoE hardware offload Full TCP/IP hardware offload –Microsoft, Chimney-compliant Network boot support: –iSCSI remote boot –FCoE boot from SAN –Preboot eXecution Environment (PXE) 2.0 /u3000 Broadcom Advanced Control Suite(BACS)management appllication.Integration into HP/'s Virtual Connect and HP ProActive Insight architecture.MSI and MSI-X support.IPv4 and IPv6 offloads.PCI-SIG SR-IOV support.Comprehensive stateless offloads.PX/TX multiqueue.Transmit Side Scaling(TSS).Support for VMware NetQueue and Microsoft VMQ.VLAN tagging support.Jumbo Frame support for frames larger than 1500 bytes.Network Teaming, Failover and Load Balancing:.-Smart Load Balancing(SLB).-Link Aggregation Control Protocol(LACP) and Generic Trunking.Data Center Bridging (DCB).Specifications: Form factor: PCI Express short, low-profile card 167.64 mm x 68.91 mm (6.60 x 2.71) Data rate:10 Gbps per port, per direction Bus type:x8 PCI Express 2.0 (5.0GT/s) MAC controller: Broadcom BCM57810S # of Ports: Dual Connector: SFP+'