More FromPermatex
Permatex 81160 High-Temp Red RTV Silicone Gasket, 3 oz
AED
34
.00
Including VAT
Highlights
- • Formulated for Hi-Temp Applications, Or Heavy-Duty Use
• Replaces Almost Any Cut Gasket, And Coats Pre-Cut Gaskets to Increase Reliability
• Makes Reliable 'Formed-In-Place' Gaskets That Resist Cracking, Shrinking and Migrating
• Temperature Range Of -65F to 650F Intermittent
Delivered by Carrefour
Sold By : RightAngle
Get It Delivered By
Description
Directions for Use:
1- For best results, surfaces should be clean and dry.
2- Cut nozzle and apply a continuous 1/16” to ¼” (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
3- Let dry for one hour then tighten to torque specifications.
4- Allow 24 hours to fully cure before filling with fluids or returning to service.
5- Replace cap after use.
Note: Not recommended for use on head gaskets or parts in contact with gasoline.
1- For best results, surfaces should be clean and dry.
2- Cut nozzle and apply a continuous 1/16” to ¼” (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
3- Let dry for one hour then tighten to torque specifications.
4- Allow 24 hours to fully cure before filling with fluids or returning to service.
5- Replace cap after use.
Note: Not recommended for use on head gaskets or parts in contact with gasoline.