Rhinomotive Radiator Flush, 375ML R1217

APPLICATION/USE

1. Prior to each coolant change, add RHINOMOTIVE Radiator Flush R1217 to the used coolant
2. Set heater and fan speed to maximum, start engine and allow to idle for 15-20 minutes to ensure the radiator flush reaches the heater core
3. After draining, rinse cooling system with distilled water
4. Then add the coolant as per manufacturer’s instructions
5. Add RHINOMOTIVE Radiator Conditioner R1219 after adding new coolant
6. 375 ml is sufficient for 5-10 litres of coolant

TECHNICAL SPECIFICATIONS

• Physical State: Liquid
• Size: 375 ml
• Made in Germany