Rhinomotive Carbon X Combustion Chamber Neutralizer K2, 500ML R1212

APPLICATION/USE

1. Add K2 after 15-20 minutes of RHINOMOTIVE CARBON X CLEANING FOAM K1 R1211 application
2. Insert the probe into the previously used access port
3. Spray K2 generously while moving up and down inside cylinder and let it react for 5 minutes
4. Vacuum the emulsion from cylinder or by removing fuel injection pump fuse and then cranking the engine pushing emulsion out of combustion chamber
5. Use enough cloth or paper towel to cover the spark plug hole to prevent contaminating the engine compartment
6. The resulting emulsion may get into the Lubrication system through the piston rings, it is recommended to change engine oil and filter after K1 and K2 application
7. Recommended to use RHINOMOTIVE Engine Flush R1201 before changing engine oil and filter

TECHNICAL SPECIFICATIONS

• Physical State: Aerosol
• Size: 500 ml
• Made in Germany