Thermalright TLM12QRWireless Splicing Chassis FanBuilding Block Splicing FanInfinity Mirror ARGB Lighting EffectReverse Blade DesignNew Power chip Module simplifies Wiring Management

Silent Fan Parameters cpu Fan size 124x120x25mm speed 1500RPM10 noise232DBA air volume 476CFM wind pressure 131mm H2O power supply interface 4PIN PWM light interface 5V 3PIN voltage DC 12V current 015A higher air flow can improve cooling performance and keep the fan low noise AntiVentilation Design The case fan blades of the M12QR series rotate counterclockwise and the fan blade surface is the air outlet direction which can provide 1500RPM rotation speed and can be used as an air intake fan for the chassis PWM Intelligent Temperature Control The cooler fan has a PWM temperature control function after connecting the fan to the interface of the motherboard there is no need to manually adjust the speed the fan can automatically set the speed according to the temperature High Performance for Heat Dissipation The 7blade design of the noise reduction type can reach 1500RPM the noise is 232 dbA and the four corners of the fan are matched with soft silicone corner pads so that the fan can achieve the performance of high heat dissipation and low noise Detail Optimization The argb fan is made of UL CLASSA insulation grade industrialgrade strength PBTPC material which supports PWM series control of the fan and the power supply interface is 4pin PWM and the lighting interface is 3pin ARGBFans of the same type are connected in series through buckles and then connected to the corresponding interface of the motherboard through connectors that fasten the wires Wireless Splicing The new power chip module cable simplifies the cable management reduces the cumbersome internal wires of the chassis and provides powerful power for the fan and the signal and power are transmitted between the fans through the contacts Note The cable of the control cable needs to be connected to the side of the fan with pins do not connect to the other side.