ElecGear Hall Joystick Kit Replacement for DualSense PS5 Controller 2X Hall Effect Control Stick 2X Calibration PCB Desoldering Repair Tools for Analog Stick Thumbsticks HLPS5

2x Hall Effect Joysticks for PS5 Hall thumbsticks Replacement for PS5 controller DS5 With the electromagnetic hallstick sensors inside the control stick delivers higher sensitivity and accuracy No more wear of traditional carbon film resistor say goodbye to drifting Warning Not work with DS Tools on Github for it does not work with this MCU 2x Addedon Calibration PCB The tiny PCB was designed to stack on the back of main board The moving signal is input to the high speed MCU The calibrated signal outputs to the main board of controller Connect the controller to a PC with a USB cable You can fine reset the center and trim the curve via a web link The accurate centering with no drift is essential for FPS aiming Desoldering Tools included A copper heating plate melts all the solder joints simultaneously simply with a soldering iron Solder Wick Holes Cleaner and simple PCB holder included With as many as 14 prongs removing the old problem stick is the most difficult task It might is not suitable for newbies though we added these helping hand in the kit Compatibility and Reminder 1 Please carefully study the images for compatible controller 2 The soldering iron must be more than 60W And the operation takes serious soldering skill and devices to desolder the old stick off the PCB 3 Seriously follow the steps we presented on the installation guide for this kit is novel and tricky Whats in box Model HLPS5 2x Hall Joysticks 2x Calibration PCB 1x Heating Plate 1x Solder Wick Teardown screwdriver tools USB input cables and wiredwireless controllers other soldering tools and materials are required however NOT included.