Takywep Industrial Water Chiller, CW-5200 Industrial Thermolysis Type Water Chiller, 9L Capacity 2.6gpm Water Cooling System for 40W-150W CO2 Laser Engraving & Cutting Machines, 5200 BTU/Hour

Powerful Cooling: The CW-5200 industrial water cooler uses standard R410A refrigerant to keep the laser cutting and engraving machine up to 40W-100W well and cool during use. 9L Capacity, 2.6gpm flow rate and 1.1hp compressor cool up to 5200 Btu. Failure Alarm: Professional laser chiller is continuously monitored by internal sensors, indicator lights and built-in alarms. Water flow, high and low temperature alarms, compressor delay protection, compressor overcurrent protection and other multiple alarm protection mechanisms, safe and efficient. Water Temperature Display: Equipped with an accurate temperature monitor that displays the temperature on the screen. Real-time temperature monitoring ensures that you can accurately monitor the operating status of your industrial chiller. Efficient Cooling Fan: The water-cooled chiller is equipped with a professional forced air-cooled radiator, which has a strong cooling capacity and is not easy to be clogged. The internal high-speed fan dissipates heat quickly. The water inlet and outlet of the CW-5200 are made of corrosion-resistant brass, which prevents any leakage problems and prolongs the service life. Effectively reduces heat buildup and cools you down when you need it most. Multiple Applications: The CW-5200 series of professional industrial laser coolers are suitable for cooling CO2 glass laser tubes up to 130W (at low room temperature) on laser engraving and cutting machines.