UES DSLR Camera Sensor and Lens Cleaning Travel Kit: Full-Frame Swab, Cleaner, Air Blower, Microfiber Cloth, Pen, Paper.

UES fullframe camera cleaning kit includes all the professional tools that you would need for cleaning your cameras. All the tools are stored safely and neatly in a waterproof hard case. The tools in this kit have wide applications that could be used to safely clean the camera sensor, lens, VR headset lens, phone or tablet screens, eyeglasses, sunglasses, binoculars, laptop, and LED LCD monitors. Package Content: ⁕ Lens and Sensor Cleaner 30ml, ⁕ FullFrame Sensor Cleaning Swab x 10, ⁕ Microfiber Lens Cleaning Cloth x 5, ⁕ Lens Cleaning Pen x 1, ⁕ Air Blower x 1, ⁕ Lens Cleaning Tissue Book (50 Sheets, ⁕ Micro Suede Screen Cleaning Cloth x 1 ⁕ Waterproof Carrying Case Sensor Cleaning Instruction: 1. Before start, shoot a piece of white paper with Aperture Priority (Amode set at f/22 or higher. On the photo, you could identify where the dust is located on your sensor. 2. For DSLR reflex cameras, make sure your camera’s battery is 100% fully charged. Set camera to sensor cleaning mode, so the delicate shutter and mirror mechanisms stay out of the way, and allow you to access the sensor. This step does not apply to mirrorless cameras. 3. Use an air blower to remove loose dust from the sensor. 4. Open one end of the swab package and remove the swab. 5. Spray the cleaner onto the swab head. 6. Hold the handle at a 60◦ angle, off the surface of the sensor. 7. Swipe the swab from one end of the sensor to the other end with a single constant motion. 8. Turn the swab 180◦ and use the clean side of the swab to swipe the sensor in the same direction again with a single constant motion. 9. Take out an unused dry swab and reperform steps 6 to 8 above to absorb any residual cleaner. 10. Discard the used swabs and never reuse the same swab on any other sensors. Always use sealed one for other applications.