OVERTURE Basic PLA 3D Printer Filament Cement Gray 1.75 × 1

E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied. FAQs: Why can't the filaments stick to the build bed. 1. Check the temperature setting before printing, PLA filaments have lower extrusion temperature. 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure an strong first layer adhesion. 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate. 4. If the effect is not good, it is recommended to try printing the draft before printing. Specification: Temperature Recommended Extrusion/Nozzle Temp: 190°C - 220°C (374℉428℉)， Heated Bed Temp: 25°C - 60°C (77℉140℉) Filaments Diameter and Accuracy: 99% Probability 1. 75 mm/- 0. 03mm Printing Speed: 4090 mm/s (2400mm5400 mm/min) Filaments Net Weight: 1 kg (2. 2 lbs) Packaging Included: 1 × spool of PLA filaments.