OVERTURE ABS 1.75mm Filament with Build Surface 200mm × 200mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer (Black 1-Pack)

Note: The recommended print setup for Overture filaments could be slightly different from other filaments. Pls read the description below, you may also get some practical suggestions through QA/ Top Review from others. FAQs: Why can't the filaments stick to the build bed. 1. Check the temperature setting before printing, ABS filaments have higher extrusion temperature. 2. Check if the plate surface has been used for a longtime, it is recommended to replace it with our new one to ensure an strong first layer adhesion. 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate. 4. If the effect is not good, it is recommended to try printing the draft before printing. Specification: Recommended Extrusion/Nozzle Temp: 245 °C - 265°C (473℉509℉ )， Heated Bed Temp: 80°C - 100 °C (176℉212℉)/ PVP stick helps Printing Speed:3070 mm/s (1,8004,200mm/ min) Fan: Low for better surface quality. Off for better strength Raft Filaments Diameter and Accuracy: 1. 75 mm/- 0. 05 Filaments Net Weight: 1 kg (2. 2 lbs) Packaging Included: 1 × spool of ABS filaments 1× surface.