ELEGOO Water Washable 3D Printer Rapid Resin 1000g.

Does it bother you when you clean 3D printed resin model using ethanol. Does it worry you when you keep a full tank of ethanol in your lab or warehouse. All the problems now have a perfect solution. ELEGOO Water Washable photopolymer resin is a significant breakthrough and no more hassle for cleaning resin model from now on. After your model is complete, put them in a container full of water and shake it or wash it under the faucet if you prefer. Save your time and save your money. Usage condition : 1Shake up the bottle before use and avoid direct sunlight and dusty environment 2Do not drink it and keep it out of the reach of children 3Please wear a mask and gloves when using to avoid direct skin contact and maintain indoor ventilation 4If you got skin contact, please wash away with waters immediately, and if you feel discomfort, please see a doctor ASAP. 5Once the model is complete, please wash it with water for 30 seconds at least and dispose of the waster properly 6If you dont use the resin, please do not leave them in the resin tank over 48 hours or put them back to its original bottle and seal it. , Material Properties : Curing wavelength: 405 nm Hardness: 79. 0 D Shrinkage: 7. 1 % Viscosity (25: 552. 0 mpa. s Liquid density: 1. 100 g/cm³ Solid density: 1. 184 g/cm³ Tensile strength: 23. 4 Mpa Elongation at break: 14. 2 % Shelf life: 1 year(see production date on the label.