غدا 12:00 م
ابحث بين أكثر من50,000+منتج

Sensky BS010 12v 24v 3a Pir Motion Sensor Long Distance Time Adjustable Small motion senser switch, white cover and white lens (White)

غير متوفر
الوصف
Description PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body. Operating voltage is 525VDC, and output voltage is equal to input voltage. High sensitivity, Easy to install. Automatic Induction When people enter into the sensing range, Motion sensor will output a voltage equal to input voltage, after the delay time, it will output 0V. During the delay time if motion detected, the delay time will reset, and start a new delay time. Application Widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more. Specification Passive Infrared Sensor Operating voltage DC: 12V Load current : 3A Delay time: Default setting 5-25s (2280 Seconds adjustable) Detecting range 110 degrees cone angle Detecting distance4M-7M (10cm-7M adjustable) Trigger way : Continuous triggering Blockade time: 0 seconds Size: 482514 mm Delay time adjustment: Clock-wise reduce the delay time , Anticlockwise increase the delay time Sensor distance adjustment: Clock-wise increase the Sensor distance, Anticlockwise reduce the Sensor distance Note: 1. The PIR Sensor requires a 'warm-up' time in order to function properly, about 10 s to1 min, depending on the delay time. during this time, the signal triggered by the module is not stable, after one minute, it will be ready. 2. Don't expose the Sensor Switch to direct sun light /lighting, big wind, or placing near to a heater or air condition. 3. Don't fix the item at a place where there are obstructing material (eg. Glass, dense clothes) which IR cannot get though. 4. Don't fix the motion sensor switch in strong shock or vibration environment.