• Fast & Free DeliveryFast & Free Delivery
  • Shop from over 1 million productsShop from over 1 million products
  • Free ReturnsFree Returns
800-73232
  • Deals
  • Bulk Savings
  • Explore
Change
Home
Drones
Add to wishlistShare
Arduino MKR ZERO (I2S bus & SD for sound,
music & digital audio data)
Arduino MKR ZERO (I2S bus & SD for sound,
music & digital audio data)
Arduino MKR ZERO (I2S bus & SD for sound,
music & digital audio data)
Arduino MKR ZERO (I2S bus & SD for sound,
music & digital audio data)
Arduino MKR ZERO (I2S bus & SD for sound,
music & digital audio data)Arduino MKR ZERO (I2S bus & SD for sound,
music & digital audio data)
More from ARDUINO

Arduino MKR ZERO (I2S bus & SD for sound, music & digital audio data)

AED 155.00(Inc. VAT)

Get it by Thu, Feb 2nd - Mon, Feb 6th
Delivery fee : AED 10.00
Sold by Sparetronic& Delivered by Carrefour
highlights
The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application development. It has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware! The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex® M0+ core. Warning: Unlike most Arduino & Genuino boards, the MKRZero runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board. The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it by a LiPo battery. The battery voltage can also be monitored since a connection between the battery and the analog converter of the board exists. You can find here your board warranty informations. Getting Started In the Getting Started section, you can find all the information you need to configure your board, use the Arduino Software (IDE), and start to tinker with coding and electronics. Microcontroller SAMD21 Cortex-M0+ 32bit low power ARM MCU Board Power Supply (USB/VIN) 5V Supported Battery(*) Li-Po single cell, 3.7V, 700mAh minimum DC Current for 3.3V Pin 600mA DC Current for 5V Pin 600mA Circuit Operating Voltage 3.3V Digital I/O Pins 22 PWM Pins 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19) UART 1 SPI 1 I2C 1 Analog Input Pins 7 (ADC 8/10/12 bit) Analog Output Pins 1 (DAC 10 bit) External Interrupts 9 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17) DC Current per I/O Pin 7 mA Flash Memory 256 KB Flash Memory for Bootloader 8 KB SRAM 32 KB EEPROM no Clock Speed 32.768 kHz (RTC), 48 MHz LED_BUILTIN 32 Full-Speed USB Device and embedded Host
1
Add to wishlistShare